ICOM
IC-40S |
| UHF C.R.S. Transceiver |
|
|
 |
- 40 CB channels with up to 20 extra private channels User programmable CTCSS signaling.
- Tough, dependable and dust proof construction with MIL-STD 810
- 2 Year Warranty
- High Receiver sensitivity
- Open, Group and Priority Scanning
- Compact size 57(W),140 (H), 37(D)mm, 370g
- Frequency Coverage: 450MHz -480MHz
- Power Supply: 9.6V DC
- Current Drain Tx:1.6A (at 5W), 0.7A (at 1W) Rx: 60mA (standby), 250mA (max. audio), 13mA (power saved)
- Antenna Impedance 50 Ohm
- Output Power 5W at 9.6V
- Sensitivity 0.25 microvolt at 12 dB sinad
- Audio Output Power 500mW * External SP connector: 2 conductor 3.5mm/8Ohm
For larger picture click on photo
* Specifications *
General
Transmitter
Receiver
Options
PDF Documentation
|
|
| Please note this information has been taken directly from ICOM Australia. The URL is provided at the bottom of the page. |
|
| |
| Frequency Coverage |
450-480MHz (Incl. all 40 UHF C.R.S.) |
| Mode |
FM16KOF3E
|
| Tuning Step Increment |
25 kHz type |
| Number of Additional Private Channels |
20 (not including C.R.S pre-programmed) |
| Power Supply Requirement |
9.6 V DC (negative ground) |
| Current Drain |
| Tx |
at 5W |
1.6 A |
| at 1W |
0.7 A |
| Rx |
standby |
60 mA |
| max.audio |
250 mA |
| power saved |
13mA |
|
| Frequency Stability |
5ppm |
| Dimensions( proj. not included) |
57(W) x 140(H) x 37(D) mm |
| Weight |
390 gm (with antenna and battery) |
|
| |
| Output Power |
5W (at 9.6 V DC) |
| Modulation System |
Variable reactance frequency modulation |
Maximum Frequency
Deviation |
± 5.0 kHz (25 kHz type) |
| Spurious Emissions |
70 dB typical (EIA) |
| Adjacent Channel Power |
70 dB (25 kHz type) |
External Microphone
Connector |
3-conductor 2.5 (d) mm /2k |
|
| |
| Receive system |
Double-conversion superheterodyne |
| Intermediate frequencies |
1st 46.35, 2nd 450kHz |
| Sensitivity (typical) |
0.25V at 12dB SINAD |
| Squelch sensitivity (typical) |
0.25  V at threshold
|
| Adjacent Channel Selectivity |
70 dB |
| Spurious Response Rejection |
70 dB |
| Intermodulation Rejection |
65 dB |
| Audio Output Power |
500 mW (typical at 10% distortion with an 8
load) |
| External Microphone Connector |
3-conductor 3.5 (d) mm /8 |
|
| |
- BC-110V
WALL CHARGER
Regularly charges the connected battery pack.
- BC-119
DESKTOP CHARGER + AD-81 CHARGER ADAPTER
For rapid charging of battery packs. An AC adapter is supplied with
the charger. Charging time: 1 to 1.5 hrs.
- BC-121
MULTI-CHARGER + AD-81 CHARGER ADAPTER
For rapid charging up to 6 battery packs simultaneously. An AC adapter
may be supplied depending on version. Six AD-81's are necessary. Charging
time: 1 to 1.5 hrs. BP-194 BATTERY CASE Battery case for AA(R6) x 8
batteries.
- BP-195/BP-196
BATTERY PACKS
BP-195: 9.6 V/700mAh; BP-196:
9.6 V/1050 mAh
- HM-46
SPEAKER-MICROPHONE
Slim dimensions. Equipped with an earphone jack and a transmit indicator.
- HM-54
SPEAKER-MICROPHONE
For operation while conveniently hanging the transceiver from your belt,
etc. HM-75A SPEAKER-MICROPHONE
Allows you to remotely select operating channels, etc.
- HS-51 HEADSET
For hands-free operation. Includes VOX, PTT and "one-touch" PTT with
a time-out timer.
- MB-68
BELT CLIP
Allows you to attach the transceiver to your belt clip. Same as supplied.
- OPC-254L DC
POWER CABLE
- CP-12L
CIGARETTE LIGHTER CABLE WITH NOISE FILTER
Allows you to charge a battery pack connected to the transceiver via
a DC power source (12 to 16 V DC). For charging ONLY--the transceiver
cannot be simultaneously operated.
- SP-13
EARPHONE
Provides clear audio in noisy environments.
|
|
http://www.icom.net.au/2000_web/products/uhf/s40_spec.html
|
|
