Airborne Avionics Australia

HOME

ICOM

VHF Air Band Transceiver


	VOR All 200 Navigation channels with CDI function Built in Side-tone function 50 memory channels Compact and lightweight body For larger picture click on photo * Specifications * General Transmitter Receiver Options PDF Documentation

Please note this information has been taken directly from ICOM Australia. The URL is provided at the bottom of the page.

IC-A22 Specifications

General

Frequency Coverage	Transmit/Receive (communications): 118.00-136.975 MHz Receive (navigation): 108.00-117.975 MHz Receive (weather): ch 01 to ch 10
Mode	Tx/Rx: AM (6K00AE3) Rx: FM (16K0G3E)
Channel spacing	25 kHz
Current drain (at 12 V DC)	Tx: 1.0 A (typical) Rx (rated audio): 400 mA (max.); Rx (squelched): 55 mA (typical)
Useable Temperature Range:	-10°C to +50°C; +14°F to +122°F
Frequency stability	±20 ppm (-10°C to +50°C)
Intermediate frequencies	1st 35.8 MHz; 2nd 455 kHz
Dimensions (projections not included)	57(W) x 170.5(H) x 37.5(D) mm; 2.25(W) x 6.72(H) x 1.48(D) in
Weight (with CM-166 and antenna)	465g; 16.4 oz

Transmitter

Receiver

Sensitivity (for 6 dB S/N)	Less than 1.0 µV
Squelch sensitivity (threshold)	Less than 4.0 µV
Selectivity	More than 8 kHz/-6 dB; Less than 25 kHz/-60 dB
Noise and hum	More than 25 dB
Spurious response rejection ratio	More than 60 dB
Audio output power	600 mW with an 8ohm load

Options

BC-79 + AD-50 DESKTOP CHARGER + DESKTOP CHARGER ADAPTER: Rapidly charge the CM-166 in approx. 1.5 hrs. An AC adapter is packed with BC-79. The optional CP-13/L or OPC-288/L can be used instead of the supplied AC adapter.
BM-112U/E WALL CHARGER: Rapidly charges the CM-80 or CM-92 in 1 hr. and the CM-97 in 3 hrs.
CM-166 BATTERY PACK: Voltage: 12 V; Capacity: 600 mAh. NiCd rechargeable battery pack provides 5 hours of operation (at a duty cycle of 5:5:90/Tx:Rx:standby). Same as supplied with the transceiver.
CM-167 BATTERY CASE: Holds R6(AA) x ten alkaline batteries.
CP-17L CIGARETTE LIGHTER CABLE: For operation and charging with a 12 V cigarette lighter socket.
OPC-515L DC POWER CABLE:For operation and charging with a 12-15 V DC power supply.
LC-122 CARRYING CASE: Fits the transceiver with the supplied CM-166.
MB-24 MOUNTING BRACKET: Hangs the receiver via belt clip to the inside door panel of a vehicle.
MB-25 MOUNTING BRACKET: Hangs the receiver via belt clip to the wall of an aircraft or similar flat surface.
OPC-499 HEADSET ADAPTER CABLE: Allows you to work with most aviation headsets. Provides the side tone function. Same as supplied with some versions.

HOME