| |
| Frequency Range |
Transmit: 118.00-136.975 MHz
Receive: 108.00-136.975 MHz |
| Mode |
6K00A3E (AM) |
| Number of Memory Channels |
19 |
| Useable Temperature Range |
-10°C to +50°C; -14°F to +122°F |
| Frequency stability |
±10 ppm (-10°C to +50°C) |
| Power Supply Requirement |
9.6 V DC ±15% (negative ground) |
| Current drain (at 9.6 V DC) |
Tx: (max power) 0.7A typical
Rx (standby): 55 mA typical
Rx (max. audio): 230 mA typical |
| Antenna Connector |
BNC (50) |
| Dimensions (projections not included) |
58(W) x 140.5(H) x 32.3(D) mm; 2-9/32(W) x 5-17/32(H) x 1-9/32(D) in |
| Weight (with battery and antenna) |
425g; 15 oz (approx.) |
|
| |
| Output Power (typical) |
3.7 W (PEP);1.0 W (CW) |
| Modulation System |
Low level modulation |
| Spurious Emissions |
Less than -60 dB |
| External Microphone Connector |
3-conductor 2.5 (d) mm (1/10")/150 |
|
| |
| Sensitivity (at 6 dB S/N) |
Less than 1.0 µV |
| Squelch Sensitivity |
Less than 1.0 µV |
| Selectivity |
More than 8 kHz/-6 dB;
Less than 25 kHz/-60 dB |
| Spurious Response Rejection Ratio |
More than 60 dB |
| Audio Output Power |
More than 500 mW at 10% distortion with an 8 load |
| External SP Connector |
3-conductor 3.5d) mm (1/8")/8 |
|
| |
- Battery Pack (varies with version)
- Wall Charger (varies with version)
- Belt Clip
- Hand strap
- Antenna
|
BATTERY PACKS AND CASE
- BP-194 BATTERY CASE: R6 (AA) batteries
x 8. Ni-Cd cells for this battery case must be purchased separately
- BP-195 BATTERY PACK: 9.6 V, 700 mAh
- BP-196 BATTERY PACK: 9.6 V, 1050 mAh
DESKTOP CHARGERS
- BC-119 + AD-81 DESKTOP CHARGER +
ADAPTER: Rapidly charges battery packs. Cannot be used to charge Ni-Cd
cells in the BP-194. Both AC and DC can be used to power the charger.
The AD-81 is sold separately.
- BC-121 + AD-81 SIX PACK DESKTOP
CHARGER + ADAPTER (up to six required): For rapid charging up to 6
battery packs. Cannot be used to charge Ni-Cd cells in the BP-194.
Both AC and DC can be used to power the charger. The AD-81s are sold
separately.
OTHER CHARGERS
- CP-12/L CIGARETTE LIGHTER CABLE WITH
NOISE FILTER: Allows you to charge the connected battery pack (13.5 to
16 V DC required). For charging ONLY -- the transceiver cannot be
simultaneously operated.
- OPC-254/L DC POWER CABLE: Allows you
to charge the connected battery pack (13.5 to 16 V DC required). For
charging ONLY -- the transceiver cannot be simultaneously operated.
- BC-110 A/D/V WALL CHARGER: Regularly
charges battery packs. Same as supplied with some versions.
OTHER OPTIONS
- HM-119 SPEAKER MICROPHONE: Durable and
full sized.
- OPC-474CLONING CABLE: Used for
handheld to handheld data cloning.
- OPC-752 HEADSET ADAPTER CABLE: Allows
you to work with most aviation headsets. Provides a side tone
function. This is supplied with some versions.
- MB-68 BELT CLIP: This is supplied with
some versions.
|
|
http://www.icomamerica.com/land_mobile/lmairband/ica4.html
|
